New_item_ua

Proper surface preparation plays a very important role and has a direct impact on the final result as well as the durability of the finished coating!

1. The surface must be clean, dry, and sound, free from dust, sand, and greasy contaminants.

2. Dust and sand should be removed by sweeping, blowing, or vacuum cleaning.

3. For stubborn dirt or stains, Profi Bruk Cleaner TM Bayris is recommended.

4. For surfaces affected by moss or lichens, use specialised products:

   • “Efflorescence and Dirt Remover” TM Bayris

   • “Moss and Lichen Remover” TM Bayris

5. After cleaning, the surface should be thoroughly rinsed with water and allowed to dry completely.

   Attention! Insufficient drying of the surface may affect the final colour shade and texture of the coating.

Yes, Profi Bruk Paint is not simply a surface coating but a paint impregnating coating that provides:

• Deep penetration: the paint impregnating coating penetrates into the concrete or stone structure.

• Durability: the pigment is retained deeper within the substrate, increasing colour stability and extending the service life of the coating.

• Protection against contamination: helps reduce the build-up of dust, dirt, moss, algae, and lichens.

• Subtle sheen and anti-slip additive: enhance both the decorative appearance and safety of the surface.

Profi Bruk Paint impregnating coating is suitable for:

• Paving stones and kerbs

• Vibropressed concrete products

• Absorbent concrete substrates

• Mineral-based facing products

• Pavements, squares, and pedestrian areas

This product is suitable for both exterior and interior applications.

Profi Bruk Paint is a professional paint impregnating coating for concrete and mineral surfaces. It penetrates deep into the pores of paving stones, kerbs, and vibropressed products, enhancing colour durability while protecting the surface from dust, dirt, water, and weathering. The paint contains an anti-slip additive and provides a subtle sheen.

MULTI FLEXIBLE PAINT TM Bayris can be purchased wholesale with VAT through official BAYRIS representatives or by submitting an enquiry via the Contacts page. You can also receive advice from a wholesale sales manager by calling 067-139-30-30.

Within the BAYRIS product range, you will find solutions for virtually all types of renovation and construction work, meeting the highest standards of quality and reliability.

Bayris Rubber Paint can be purchased from retail builders’ merchants, major national DIY chains, and BudBox branded showrooms, or ordered online with delivery throughout Ukraine from the official BudBox online store or via selected marketplaces.

• If you need a versatile, flexible coating for façades, metal surfaces, and fences, a rubberised paint is the ideal choice.

• If long-term professional roof protection is required, it is advisable to use a specialised roof coating system.

Slate is a porous mineral material that requires:

• high vapour permeability

• enhanced adhesion

• biocidal treatment against moss and fungal growth

That is why the roof coating system also includes the antiseptic treatment Bio Stop Bayris and the specialised paint-modifying additive Profi Roof Additive.

High hiding power: one coat covers approximately 6 m²/l. This makes MATTLATEX PRIME an economical and efficient solution for both interior and exterior applications.

Suitable for cement, cement-lime, gypsum, plasterboard, brick, timber, wood-based materials, and wallpapers intended for painting. It can also be used on façades within thermal insulation systems based on expanded polystyrene (EPS).

The product combines the characteristics of both an interior and exterior paint: a matt finish, high hiding power, resistance to intensive washing (up to 20,000 cycles according to DIN EN 13300), the ability to conceal minor surface imperfections, good breathability, and easy application.

A 2-in-1 latex paint for the decorative and protective coating of interior walls and ceilings as well as building façades. Suitable for cement, gypsum, timber, and wallpapered surfaces.

Roof Paint Additive TM Bayris can be purchased from retail builders’ merchants, major national DIY chains, and BudBox branded showrooms, or ordered online with delivery throughout Ukraine from the official BudBox online store or via selected marketplaces.

Shake well before use. Add the product to the paint while mixing with a low-speed mixer, following the recommended dosage rates. The paint should then be applied in accordance with its own application instructions.

Yes, the additive can be incorporated into water-based façade paints and renders to improve the vapour permeability of the finished coating.

For reliable asbestos slate roof coating, the additive should be used. It improves the adhesion of the paint to the porous surface and enhances the overall performance characteristics of the coating.

Stir thoroughly until a uniform consistency is achieved, then apply by roller, brush, or spray in 1–2 coats with an interval of 2–4 hours between coats. The coating reaches its full performance properties after 28 days; cleaning should be carried out only with a soft sponge or cloth, avoiding brushes with stiff bristles.

The product is safe for indoor use and contains no toxic substances. VOC content is ≤ 30 g/l in the ready-to-use product (regulatory limit: ≤ 75 g/l). Waste should be disposed of in accordance with local regulations, and empty packaging should be taken to authorised collection and recycling facilities.

Rubberised paint is a versatile product designed for a wide range of surfaces.

The professional roof coating system Profi Roof Paint Bayris is specifically developed for roofing applications and offers:

• enhanced anti-corrosion protection

• improved weather resistance

• a formulation adapted for metal and slate roofs

• a complete system approach (cleaner, antiseptic treatment, additive, and paint)

When the application system is followed correctly, the coating can last 10 years or more, as demonstrated by real projects and supported by customer photo and video reviews.

Yes, the paint can be used on metal and other types of roofs following proper surface preparation. It provides elasticity and basic anti-corrosion protection. However, a roof is an area exposed to increased stress (UV radiation, moisture, temperature fluctuations, and corrosion), so for the longest-lasting results, a specialised roof coating system is recommended.