New_item_ua
BAYRIS Super Plasticiser should be used at a dosage of 0.2–0.4 litres per 50 kg of cement. The exact dosage depends on the required properties of the concrete mix and the ambient temperature. To determine the optimum dosage for a specific application, on-site trial testing is recommended.
REM-HELP Cement and Mortar Remover by BAYRIS can be purchased from retail builders’ merchants, major national DIY chains, and BudBox showrooms. You can also conveniently order online from the official BudBox online store or leading marketplaces, with delivery throughout Ukraine, choosing the most suitable option for either professional or household use.
BAYRIS Anti-Frost Plasticiser for Façades should be added together with the mixing water and thoroughly blended. Do not add the product directly to the dry mix.
Yes, BAYRIS Anti-Frost Plasticiser is chloride-free and safe for reinforcement, making it suitable for both reinforced and non-reinforced concrete.
No. The use of frozen aggregates, sand, or crushed stone is strictly prohibited.
Correct dosage ensures the required concrete strength and helps prevent adverse effects on reinforcement and structural elements.
Yes. During winter concreting, the mixing water is recommended to be heated to 70–80°C.
For winter concreting, a cement content of 270–300 kg per m³ of concrete mix is recommended.
No. It is not an antifreeze. The admixture works in combination with cement, accelerates the hardening process, and reduces water demand in the concrete mix.
BAYRIS Anti-Frost Plasticiser can be used at ambient temperatures ranging from +5°C to –15°C, provided that proper concreting procedures are followed.
An anti-frost plasticiser is a specialised admixture for concrete and mortar mixes that lowers the crystallisation temperature of water and allows concrete to harden at low and sub-zero temperatures.
BAYRIS Anti-Frost Admixture improves the workability of the mix, reduces water demand, and enhances the density, water resistance, and frost resistance of concrete.
Yes. At temperatures below 0°C, freshly placed concrete must be protected from freezing, particularly during the early stages of hardening.
This anti-frost additive for façade insulation systems reduces water demand by up to 30%, improves the workability of the mix, accelerates early strength development, and increases the final strength and density of the adhesive.
No. The minimum temperature of the adhesive mix must be +5°C. Work at temperatures below 0°C is not permitted unless the façade is adequately protected.
No. This product is designed exclusively for use with cement-based tile adhesives. For façade renders and plasters (acrylic, silicone and similar systems), specialised additives with different formulations should be used.
This anti-frost plasticiser is designed exclusively for use with cement-based adhesives for expanded polystyrene (EPS), extruded polystyrene (XPS), and mineral wool insulation boards.
BAYRIS Anti-Frost Plasticiser is a specialised additive for cement-based adhesives used in façade insulation systems. It allows work to be carried out at reduced temperatures down to –8°C and accelerates the setting of the adhesive mix.
BAYRIS Anti-Frost Plasticiser can be purchased from builders’ merchants, BudBox showrooms, or ordered online from the official BudBox online store and leading marketplaces.
Yes. During the summer period, BAYRIS Anti-Frost Plasticiser accelerates concrete strength development and helps reduce formwork removal times.