New_item_ua
The approximate coverage rate is 0.15–0.25 L/m² per coat, depending on the type of surface and its absorbency.
Silikat Grunt PR3 is a deep penetrating silicate primer designed to strengthen and prepare mineral substrates before the application of lime-based and silicate paints. It reduces water absorption, equalises the substrate, and improves the adhesion of decorative coatings.
Bio Stop Antiseptic Treatment for Mineral Surfaces by BAYRIS can be purchased wholesale through official BAYRIS representatives or by submitting an enquiry via the Contacts page. You can also receive advice from a wholesale account manager by calling 067-139-30-30.
Within the BAYRIS product range, you will find solutions for virtually all types of construction, renovation, and finishing work, meeting the highest standards of quality and reliability.
Bio Stop Antiseptic Treatment for Mineral Surfaces by BAYRIS can be purchased from retail builders’ merchants, major national DIY chains, BudBox showrooms, or ordered online with delivery across Ukraine from the official BudBox online store and selected marketplaces.
Further finishing work and priming are recommended 12–14 hours after the application of Bio Stop.
Apply the product in 1–2 coats without dilution using a brush, roller, scrubbing brush, or spray equipment to a clean, dry surface.
No, the product does not contain chlorine, has no strong odour, and is safe to use when applied in accordance with the manufacturer’s instructions.
No. Once dry, the product does not form a film and does not impair the adhesion or absorbency of the substrate.
Yes, BAYRIS Bio Stop Antiseptic Treatment is suitable for use both indoors and on exterior building surfaces.
The product is suitable for concrete, cement, cement-lime and lime plasters, fillers, screeds, calcium silicate brick, and other mineral substrates. It can be used for both interior and exterior applications, including the restoration of historic and heritage buildings.
Yes. Silikat Grunt PR3 Deep Penetrating Primer Concentrate 1:4 has been specifically developed for use before the application of silicate and lime-based paints. For optimum results and a “breathable wall” effect, it is recommended for use in combination with BAYRIS Eco Home Lime Paint.
The approximate coverage rate is 0.15–0.25 L/m² per coat, depending on the type of surface and its absorbency.
Yes. The product is recommended for areas with elevated humidity levels, such as bathrooms, kitchens, and basements, as well as spaces with poor ventilation. It is suitable for both interior and exterior applications.
Suitable for lightweight concrete, plaster, gypsum-based surfaces, brick, and other mineral substrates before filling, painting, wallpapering, or tiling.
DPA Grunt PR3 is a deep penetrating primer with anti-mould properties, designed to strengthen fine-porous mineral substrates with high absorbency. It improves the adhesion of finishing materials and helps prevent the development of mould, fungal growth, and blue stain.
Yes, Silikat Grunt PR3 by BAYRIS can be purchased wholesale through official BAYRIS representatives or by submitting an enquiry via the Contacts page. You can also receive advice from a wholesale account manager by calling 067-139-30-30.
Within the BAYRIS product range, you will find solutions for virtually all types of construction, renovation, and finishing work, meeting the highest standards of quality and reliability.
Silikat Grunt PR3 Deep Penetrating Silicate Primer by BAYRIS can be purchased from retail builders’ merchants, major national DIY chains, BudBox showrooms, or ordered online with delivery across Ukraine from the official BudBox online store and selected marketplaces.
The approximate coverage rate is 0.15–0.25 L/m² per coat, depending on the type and absorbency of the substrate, as well as the application method.
Before application, the product should be diluted at a ratio of 1:4 (1 litre of primer to 4 litres of clean or distilled water). Apply using a “wet-on-wet” method until the surface is fully saturated. Subsequent work can be carried out after 4–6 hours.
Yes. The product penetrates deeply into mineral substrates, disinfects them, and significantly reduces the risk of mould and fungal growth reappearing after renovation work.