Available Pack Sizes
1 L
5 L
Intended Use
Bayris Efflorescence and Dirt Remover is a highly effective cleaner for removing efflorescence and dirt from façades and other surfaces made of ceramic tiles, brick, natural and artificial stone, as well as other acid-resistant materials. The product quickly and effectively removes dirt caused by everyday exposure to environmental conditions (water action, dust and dirt deposits, discolouration), as well as cement residue.
If it is not known whether the surface is acid-resistant, it is recommended to carry out a small test on an inconspicuous area.
Warning!!! Do not use the product on materials that react with acids, such as marble, aluminium or chrome-plated surfaces.
Application Method
Bayris Efflorescence and Dirt Remover should be diluted with cold water depending on the level of contamination, from 1:1 (heavy contamination, grout residue and cement deposits) to 1:20 (light dirt and dust). The surface to be cleaned should first be wetted with clean water, after which the product should be applied using a brush, roller or cloth. Leave the product to work for approximately 10 minutes. Then rinse the surface thoroughly with water.
Health and Safety
Causes severe skin burns and eye damage. Keep out of reach of children. Wear protective gloves / protective clothing / eye protection / face protection. May be corrosive to certain materials.
If swallowed: rinse mouth thoroughly. Do not induce vomiting.
If in contact with eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for several more minutes.
Highly effective cleaner for removing efflorescence and dirt from façades and other surfaces made of ceramic tiles, brick, natural and artificial stone, as well as other acid-resistant materials.
Packaging 1 L, 5 L
Dilution Rate depends on the absorbency of the substrate and the degree of contamination
TEMPERATURE RANGE: store/use at temperatures from +5 °C to +35 °C