New_item_ua
Original FIBER-PLUS Microfibre by BAYRIS can be purchased from official BAYRIS partners, retail builders’ merchants, and major DIY and construction hypermarkets throughout Ukraine. If you prefer to order reinforcing fibres online, they are available from the BudBox online store and leading marketplaces, with delivery across Ukraine.
When choosing microfibre reinforcing fibres, we recommend considering the following factors:
- Is the microfibre manufactured from 100% virgin raw materials?
- Does one kilogram contain more than 200 million microfibres?
- Is the fibre material resistant to acids and alkalis?
- Is there proven international experience of using this type of microfibre?
- Is this type of microfibre used in industrial construction projects?
If you are interested in FIBER-PLUS™ by BAYRIS, the answer to all of the above questions is yes. Choose with confidence.
Yes, BAYRIS Profi Roof Paint is a professional-grade coating that is suitable for painting slate roofs. However, when coating slate, it is essential to add the specially developed additive designed to improve vapour permeability of the finished coating, helping to extend the service life of the roof. For the best results, all BAYRIS recommendations for slate roof painting should be followed, as outlined on the product label.
BAYRIS Profi Roof Paint should be applied in a minimum of two coats, as a single-coat application creates a protective film that is too thin and will not provide sufficient long-term protection for galvanised steel roofs or other roofing surfaces.
Profi Roof Cleaner (Concentrate 1:5) is a professional roof cleaning solution specially developed by BAYRIS technologists as part of the complete professional roof painting system. The use of BAYRIS Profi Roof Cleaner ensures effective removal of various types of contamination, including stubborn and aged dirt, significantly improving the adhesion of the first coating layer. For maximum convenience, Profi Roof Cleaner is supplied in a concentrated form.
One of the advantages of BAYRIS Profi Roof Paint is that priming before the finishing coat is only required in areas affected by rust, which must first be cleaned and primed. However, the extent of priming depends on the condition of the roof. If the entire roof is affected by rust, the whole surface should be primed before painting.
The key advantage of BAYRIS Profi Roof Paint is that it is a professional-grade product forming part of a complete roof coating system specifically developed for high-quality roof refurbishment and protection. It can be used on galvanised steel roofs, slate roofs, fibre-cement and asbestos-cement roofing sheets, as well as concrete and other mineral substrates.
Unlike many general-purpose rubber roof paints commonly available on the market, BAYRIS Profi Roof Paint contains specialised anti-corrosion additives (corrosion inhibitors) that provide effective protection for metal surfaces against corrosion.
The use of the specialised Roof Paint Additive allows the coating to be easily adapted for professional application on vapour-permeable mineral substrates, such as slate roofing, while maintaining the required breathability of the surface.
To some extent, BAYRIS Profi Roof Paint can be described as a “rubber roof paint” because its cured coating provides excellent flexibility and elasticity. This elasticity is essential for maintaining the integrity of the coating during temperature fluctuations, as metal roofs contract in winter and expand in summer. In simple terms, the paint coating must be able to “move with the metal” when temperatures change significantly.
This level of flexibility can typically only be achieved with water-based roof coatings. In contrast, alkyd-based paints form a strong but relatively rigid film. In many universal rubber paints, elasticity is achieved partly through the use of plasticisers, which may gradually leach out over time, causing the coating to lose flexibility.
BAYRIS Profi Roof Paint uses a combination of specialised dispersions instead of conventional plasticisers, helping the coating maintain its elastic properties for a longer period and providing more durable long-term performance.
BAYRIS Super Plasticiser can be purchased wholesale through official BAYRIS representatives or by submitting an enquiry via the Contacts page. You can also receive advice from a wholesale account manager by calling 067-139-30-30.
BAYRIS is actively developing international distribution and export partnerships. We welcome cooperation with distributors, wholesalers, DIY chains, and construction materials suppliers worldwide. Export partners receive technical support, marketing materials, and assistance with product selection for local market requirements. For export enquiries and partnership opportunities, please contact our Export Department on 077-500-11-22.
Within our product range, you will find solutions for virtually all types of concrete mixes and mortars, meeting the highest standards of quality and reliability.
Original BAYRIS Super Plasticiser can be purchased from authorised BAYRIS retail partners or ordered online with delivery throughout Ukraine.
Yes, BAYRIS Profi Roof Paint is a professional-grade roof coating suitable for painting slate roofs. However, when applying the product to slate, it is essential to add the specially developed Roof Paint Additive, which improves the vapour permeability of the coating and helps extend its service life. It is also important to follow all BAYRIS recommendations for slate roof painting, as provided on the product label.
Original Profi Roof Paint by BAYRIS can be purchased from authorised BAYRIS partners, retail builders’ merchants, and major DIY and construction hypermarkets throughout Ukraine. If you prefer to order roof paint online, it is available from the BudBox online store and leading marketplaces, with delivery across Ukraine.
Even among construction professionals, there is sometimes a misconception that microfibre can completely replace structural reinforcement, such as reinforcing bars in load-bearing concrete elements. However, this is not the case. Microfibre is used for dispersed reinforcement, the purpose of which is to improve crack resistance, impact strength, and reduce shrinkage, rather than to increase the load-bearing capacity of a structure, as conventional steel reinforcement does.
In many screed and floor applications, polypropylene microfibre may be used as an alternative to traditional shrinkage-control steel mesh. However, the suitability of such a solution should always be assessed according to the project requirements and the designer’s specifications.
FIBER-PLUS™ Microfibre by BAYRIS is compatible with all BAYRIS admixtures for concrete and mortars and does not cause damage to construction equipment or tools.
The use of FIBER-PLUS™ Reinforcing Fibres by BAYRIS helps prevent cracking in concrete and reduces shrinkage. The product improves tensile strength and impact resistance, while also enhancing the frost resistance and water tightness of concrete.
FIBER-PLUS™ by BAYRIS is suitable for use in all types and grades of concrete. It is particularly well suited for underfloor heating systems and can be used in the production of paving blocks, kerbs, concrete slabs, and foamed concrete. Polypropylene fibre may also be incorporated into water-resistant rendering mortars, cement-sand screeds, and monolithic concrete wall construction.
Microfibre is used for dispersed reinforcement in concrete and mortars. Dispersed reinforcement involves distributing a large number of individual fibres throughout the concrete or mortar mix. An important requirement is that the fibres must remain chemically stable and not react with the cementitious matrix. A fibre length of 12 mm is the most widely used, as fibres longer than 18 mm generally become less effective due to the significantly lower number of fibres contained within each kilogram.
FIBER-PLUS™ by BAYRIS features a fibre length of 12 mm and is fully resistant to acids and alkalis. Its high melting point, excellent modulus of elasticity, and strong tensile properties make polypropylene fibre a reliable and proven reinforcement material that has been used worldwide for more than 40 years. The combination of these characteristics provides significant advantages over many alternative micro-reinforcement solutions.
In addition, polypropylene fibre offers several important technical advantages over basalt and glass fibres. These include a substantially higher fibre count per kilogram, complete resistance to both acids and alkalis, and improved distribution throughout the mix. Unlike some alternative fibres, polypropylene fibres do not tend to clump together or settle in the lower layers of concrete or mortar, as their density is close to that of water. These properties help ensure more uniform reinforcement and improved long-term performance.
A wide range of fibre reinforcement solutions is available on the market. The most common types, classified by material, include: steel fibre, basalt fibre, glass fibre (composite), polyester fibre, and polypropylene fibre (polymeric).
Polypropylene fibre is the most widely used type of reinforcing fibre and is the most popular choice worldwide.
The word “fibra” originates from Latin and means “fibre”. Microfibre consists of polypropylene reinforcing fibres designed to improve the physical, mechanical, and performance properties of reinforced concrete structures and construction mortars used in both residential and industrial construction.
Professional Profi Roof Paint by BAYRIS can be purchased wholesale through official BAYRIS representatives or by submitting an enquiry via the Contacts page. You can also receive advice from a wholesale account manager by calling 067-139-30-30.
BAYRIS is actively developing international distribution and export partnerships. We welcome cooperation with distributors, wholesalers, DIY chains, and construction materials suppliers worldwide. Export partners receive technical support, marketing materials, and assistance with product selection for local market requirements. For export enquiries and partnership opportunities, please contact our Export Department on 077-500-11-22.
Within the BAYRIS product range, you will find solutions for virtually all types of construction, renovation, and finishing work, meeting the highest standards of quality and reliability.