New_item_ua

How long does 3-in-1 primer-enamel take to dry?

At +22°C:

  • dust dry – 6 hours

  • fully dry – 12 hours

Drying times will increase at lower temperatures.

What can be used to thin 3-in-1 primer-enamel?

Dilution of up to 10% by weight is permitted using the recommended thinner “Lösungsmittel Bayris”.

Note:
The thinner affects more than just viscosity. It plays an important role in dissolving the alkyd resin, controlling evaporation rate and ensuring proper formation of the protective film. Using an unsuitable or low-quality thinner may result in coating defects, changes in drying time, reduced adhesion and diminished anti-corrosion performance. Even minor variations in thinner composition can significantly reduce the durability and service life of the coating.

What applications is 3-in-1 anti-corrosion paint suitable for?

“3 in 1 KORROSIONSSHUTZ” by TM “Bayris” (“3-in-1 Rust Converter Paint” by Bayris) is suitable for both exterior and interior applications:

  • gates and wickets

  • metal structures

  • agricultural machinery

  • equipment

  • pipes and tanks

The coating is resistant to weathering, water, cleaning agents and UV exposure.

Is this water-based varnish safe for interiors?

Yes. This is a water-based varnish with a low odour and a low VOC content (up to 30 g/L), compliant with the requirements of the Ukrainian Technical Regulation.

It is suitable for use in flats, private homes and offices when applied in accordance with the instructions.

What is the varnish coverage rate & how many coats are required?

Average coverage: 8–10 m²/L per coat.

It is recommended to apply 2–3 coats depending on the porosity of the substrate.
Recoating time: 2–4 hours.

The coating reaches its full strength and wash resistance after 28 days.

Where can I buy Wood Bioprotection Concentrate 1:9?

Wood Bioprotection Concentrate 1:9 (Clear) by TM "Bayris" (Concentrate 1:9 by Bayris) can be purchased from retail DIY and hardware stores, major national building supply chains, Bayris-branded BudBox stores, or ordered online with delivery throughout Ukraine from the official BudBox online store or via leading marketplaces.

Is it safe for metal fasteners?

The product has low corrosive activity towards ferrous metals and is suitable for use in structures containing metal fasteners and connections.

Where can I buy Green Wood Bioprotection Concentrate 1:9?

Wood Bioprotection Concentrate 1:9 (Green) by TM "Bayris" (Concentrate 1:9 by Bayris) can be purchased from retail DIY and hardware stores, major national building supply chains, Bayris-branded BudBox stores, or ordered online with delivery throughout Ukraine from the official BudBox online store or via leading marketplaces.

Can I buy Green Wood Bioprotection Concentrate 1:9 wholesale?

Green Wood Bioprotection Concentrate 1:9 by TM "Bayris" can be purchased wholesale with VAT through authorised Bayris representatives or by submitting an enquiry via the Contacts page.

We actively cooperate with distributors, importers, wholesalers, retail chains and professional partners in international markets. BAYRIS offers export support, flexible partnership terms, technical assistance and marketing cooperation. To discuss distribution opportunities, export supplies, exclusive representation or private label projects, please contact our Export Department on 077-500-11-22.

Within the BAYRIS product range, you will find solutions for virtually any renovation or construction project, all meeting the highest standards of quality and reliability.

What is Copper Wood Protection 1:6 (Brown)?

Copper Concentrate 1:6 is a concentrated copper-based wood preservative designed to protect timber against rot, mould, blue stain fungi, wood-boring insects and UV exposure. After application, it gives the wood a light brown tint.

What does copper wood preservative protect against?

The product protects timber against:

  • wood-rotting fungi;

  • mould and blue stain fungi;

  • algae, moss and lichens;

  • wood-boring insects;

  • weathering and UV radiation.

It is suitable for timber structures exposed to demanding service conditions.

How should Concentrate 1:6 be diluted correctly?

The working solution should be prepared at the following ratio:
1 litre of concentrate to 6 litres of clean water.

Stir thoroughly before use.

What is the coverage rate of Copper Concentrate?

Recommended coverage rate: 250–400 ml/m² per coat.

Minimum consumption starts from 0.25 L/m².
Actual consumption depends on the timber species and the application method.

Is copper wood preservative resistant to washout?

No. Thanks to its active copper-based formulation, the product is resistant to washout during service and provides long-term protection (Use Classes 1–4.1 in accordance with DSTU EN 335-1:2010).

How long does it take to dry and when can it be painted?
  • Drying time per coat: 4–6 hours

  • Protect from water exposure for at least 48 hours

  • Full fixation and protection: up to 3 weeks

Once fully dry, decorative and protective wood finishes may be applied.

What is the difference between the brown & grey-green versions?

The only difference is the colour tone after application:

  • Brown → light brown tone

  • Grey-Green → olive (grey-green) tone

The protective properties, coverage rate and formulation are identical. When choosing a colour version of the copper wood preservative, it is recommended to consider the final colour of the decorative protective coating that will be applied afterwards.

Where can I buy Copper Wood Bioprotection Concentrate 1:6?

Copper Wood Bioprotection Concentrate 1:6 (Brown) by TM "Bayris" ("Concentrate 1:6" by Bayris) can be purchased from retail DIY and hardware stores, major national building supply chains, Bayris-branded BudBox stores, or ordered online with delivery throughout Ukraine from the official BudBox online store or via leading marketplaces.

Is it suitable for industrial and B2B applications?

Yes. The product is widely used in:

  • wood processing industries;

  • timber-frame house manufacturing;

  • roofing system installation;

  • construction companies.

Green Wood Bioprotection Concentrate 1:9 by TM "Bayris" is available in 1,000-litre IBC containers at competitive VAT-inclusive pricing for professional and B2B customers.

What pack sizes are available for Green Wood Bioprotection?
  • 1 L

  • 5 L

  • 1,000 L (IBC container for B2B applications)

How can I buy Clear Wood Bioprotection wholesale with VAT?

Clear Wood Bioprotection Concentrate 1:9 by TM "Bayris" can be purchased wholesale with VAT through authorised Bayris representatives or by submitting an enquiry via the Contacts page.

We actively cooperate with distributors, importers, wholesalers, retail chains and professional partners in international markets. BAYRIS offers export support, flexible partnership terms, technical assistance and marketing cooperation. To discuss distribution opportunities, export supplies, exclusive representation or private label projects, please contact our Export Department on 077-500-11-22.

Within the BAYRIS product range, you will find solutions for virtually any renovation or construction project, all meeting the highest standards of quality and reliability.