New_item_ua

Available pack sizes: 1 L and 5 L.

Coverage depends on the service conditions:

• from 0.15 L/m² — for interior applications and exterior applications under cover

• from 0.25 L/m² — for structures exposed to weather conditions

Actual consumption may vary depending on the timber species, its absorbency and the method of application.

The substrate should be:

• dry (moisture content not exceeding 25%)

• clean

• free from dust

• free from signs of rot and bacterial contamination

If necessary, the surface should be mechanically cleaned before application.

No. "AQUAGRUNT" is a timber primer, not a finishing coating. For complete protection, it must be overcoated with a decorative and protective finish such as paint, wood stain, varnish, woodcare glaze or enamel.

• Manufacturers of timber structures

• Construction companies

• Joinery workshops

• Façade installation contractors

• Private homeowners

It is a professional solution for anyone who wants timber to remain protected for years without biological deterioration.

AQUAGRUNT Bio-Protective Timber Primer by TM "Bayris" can be purchased from retail DIY and hardware stores, major national building supply chains, Bayris-branded BudBox stores, or ordered online with delivery throughout Ukraine from the official BudBox online store or via leading marketplaces.

AQUAGRUNT Bio-Protective Timber Primer by TM "Bayris" can be purchased wholesale, VAT included, through authorised Bayris representatives or by submitting an enquiry via the Contacts page. You can also receive advice from a wholesale sales manager by calling 067-139-30-30.

Within the BAYRIS product range, you will find solutions for virtually any renovation or construction project, all meeting the highest standards of quality and reliability.

"BASE-GRUNT" by Bayris is a deep-penetrating bio-protective timber primer based on a hybrid dispersion technology. It is designed for use before applying decorative and protective coatings, particularly alkyd-based products.

Designed for:

• protecting timber against rot

• preventing mould, fungal growth and blue stain

• controlling moss, lichens and algae

• preventing infestation by wood-destroying insects (woodworm, bark beetles and furniture beetles)

It is a professional preservative primer developed for the long-term protection of timber structures.

The product is designed for timber elements that are not in direct contact with the ground:

• windows and doors

• timber cladding

• façade boards

• timber frames and log structures

• roof rafters

• fences

• gazebos

• garden furniture

• load-bearing timber structures

Suitable for residential, professional and industrial applications (Use Classes 1–3 in accordance with DSTU EN 335-1:2010). Manufactured in compliance with the ISO 9001:2015 quality management system.

• Provides deeper penetration into the timber structure

• Will not leach out during service life

• Does not form a film or leave a salt residue

• Does not alter the colour or texture of the timber

• Balances the substrate's water absorption

• Reduces the consumption of subsequent decorative and protective coatings

• Perfectly compatible with alkyd-based coating systems

A single coat application is sufficient to provide protection.

Available pack sizes: 1 L and 5 L.

Coverage:
from 0.12 L/m² (120–150 ml/m²) per coat. Actual consumption depends on the timber species, moisture content, absorbency and method of application.

• Application temperature: from +5°C to +25°C

• Relative air humidity: 50–75%

• Permissible timber moisture content: not more than 18%

Drying time: 2–4 hours per coat.

Apply by brush, roller, broom or spray as a uniform continuous coat.

• Water-based formulation (without the strong odour of solvent-based products)

• Ready to use

• Will not leach out during service life

• Does not alter the colour or structure of the timber

• Does not form a film or leave salt deposits

• Does not damage cellulose in the surface layer

• Functions as a professional primer for paints and varnishes

It is more than just a wood preservative — it is a complete foundation for a long-lasting decorative coating system.

The product is designed for timber elements that are not in direct contact with the ground:

• windows and doors

• timber cladding and façade boards

• timber frames and roof rafters

• log structures

• fences

• gazebos

• garden furniture

• floors

• supports and load-bearing structures

Suitable for residential, professional and industrial applications (Use Classes 1–3 in accordance with DSTU EN 335-1:2010).

"Profi Bruk Paint" professional impregnating paint for paving and concrete surfaces by TM "Bayris" can be purchased wholesale, VAT included, through authorised Bayris representatives or by submitting an enquiry via the Contacts page. You can also receive advice from a wholesale sales manager by calling 067-139-30-30.

Within the BAYRIS product range, you will find solutions for virtually any renovation or construction project, all meeting the highest standards of quality and reliability.

"Sadivnyk" Paint is a professional decorative and protective coating containing lime and antiseptic additives. It creates a bright white finish that helps prevent the growth of moss and fungi, deters pests, improves frost resistance, protects against sunscald and temperature fluctuations, and does not interfere with the natural breathing of trees and shrubs. Ideal for gardeners, orchards, property management companies, hotel complexes, health resorts and similar facilities.

The product is suitable for:

• Fruit and ornamental trees and shrubs

• Pruning cuts, wounds and bark damage

• Outbuildings, fences and kerbstones

• Ideal for use in orchards, health resorts, hotel complexes, property management companies, gardens, parks and public green spaces

• Consistent quality for more than 10 years

• Unique antiseptic additives to help deter pests

• The coating is not washed away by rain

• Protects against moss, lichens, fungi and sunscald

• Can be applied to pruning cuts and branch bases

Remove dead bark, moss and lichens before application. Mature trees should be cleaned using wire brushes or specialised scrapers, while young trees should be cleaned by hand or with wooden tools. Particular attention should be paid to branch bases and the areas between the trunk and the main scaffold branches.

• Stir the paint thoroughly until a uniform consistency is achieved

• Application temperature: +3°C to +20°C, relative humidity up to 80%

• The first coat may be diluted with up to 5% water; subsequent coats should be applied undiluted

• Apply by masonry brush, roller or spray in 2 coats

• Apply 3–4 cm below ground level around the trunk and up to 1.5–1.7 m high on the trunk and branch bases

• Minimum interval between coats: 1–4 hours

• Drying time: 1–4 hours per coat

Coverage depends on the type of surface and method of application (approximately 170 g/m² per coat). "Sadivnyk" Paint by Bayris is available in convenient pack sizes starting from 1.4 kg, as well as 3 kg, 7 kg and 14 kg buckets.