New_item_ua

What is INSECTOLL TM Bayris and where can it be used?

"INSECTOLL" is a specialised treatment for the elimination of wood-destroying insects (woodworm, furniture beetles, longhorn beetles and termites) and for the prevention of timber infestation. It provides long-lasting protection for timber elements in buildings, furniture and structural applications.

The product is suitable for timber structures both indoors and outdoors where there is no direct ground contact, including roof rafters, supports, fences, garden furniture, log structures, windows, doors, timber cladding and load-bearing timber elements.

How should INSECTOLL be used for prevention and infested timber?

  • For preventive treatment: apply by brush, roller, broom or immersion in 1–2 coats.

  • For infested timber: use the injection method into insect galleries and cavities, followed by repeated impregnation treatment.

  • After treating exterior timber, the application of a decorative coating (paint, varnish or woodcare glaze) is recommended.

What are the drying time and effectiveness of INSECTOLL?

Drying time is 2–4 hours at a relative humidity of 50–75%. The insecticidal effect becomes apparent within 1 to 14 days, depending on the depth at which the pests are living within the timber.

What pack sizes and coverage does INSECTOLL offer?

  • Available pack sizes: 1 L and 5 L

  • Coverage: from 0.2 L/m² (for preventive treatment) and 0.3 L/m² (for insect eradication). Actual consumption depends on the timber species, construction type and method of application.

Is INSECTOLL safe for domestic and professional use?

Yes, the product is suitable for domestic, professional and industrial use when applied in accordance with the instructions. It does not alter the structure or colour of the timber, does not form a surface film, and provides long-lasting protection against wood-destroying insects.

Where can I buy INSECTOLL termite and woodworm treatment?

"INSECTOLL" insect eradication treatment for termites, woodworm and other wood-destroying insects by Bayris ("Insectoll" by Bayris) can be purchased from retail DIY and hardware stores, major national building supply chains, Bayris-branded BudBox stores, or ordered online with delivery throughout Ukraine from the official BudBox online store or via leading marketplaces.

How can I buy INSECTOLL wholesale with VAT?

"INSECTOLL" insect eradication treatment by TM "Bayris" ("Insectoll" by Bayris) can be purchased wholesale, VAT included, through authorised Bayris representatives or by submitting an enquiry via the Contacts page.

We actively cooperate with distributors, importers, wholesalers, retail chains and professional partners in international markets. BAYRIS offers export support, flexible partnership terms, technical assistance and marketing cooperation. To discuss distribution opportunities, export supplies, exclusive representation or private label projects, please contact our Export Department on 077-500-11-22.

Within the BAYRIS product range, you will find solutions for virtually any renovation or construction project, all meeting the highest standards of quality and reliability.

What is ALKIDLAZUR by Bayris?

"ALKIDLAZUR" TM "Bayris" is a decorative and protective alkyd wood stain varnish – a rare high-quality product on the Ukrainian and EU markets. It provides deep penetration into timber, stone, concrete and other surfaces, while forming a durable protective coating resistant to weathering.

Where can ALKIDLAZUR alkyd wood stain varnish be used?

The product is suitable for interior and exterior applications, including timber window frames, doors, garden furniture, fences, gazebos, timber building elements, decorative cladding on fireplaces and stoves, as well as concrete products, stone and other mineral surfaces.

Why choose alkyd wood stain varnish over water-based coatings?

  • Deep penetration into the timber for long-lasting protection.

  • High heat resistance (up to +150°C) and a durable protective coating.

  • Resistant to UV radiation, water and cleaning agents.

  • Can be applied to various surfaces, including timber, stone and concrete.

What colours are available?

  • Walnut

  • Brown

  • Chestnut

  • Rosewood

  • Teak

  • Pine

  • White

  • Grey

The colours preserve the natural grain of the timber and do not create an opaque film.

Is it safe for metal fixings?

The product has low corrosive activity towards ferrous metals and is suitable for use in structures incorporating metal fixings and connections.

Can the varnish be diluted with water?

Yes, dilution with water is permitted by up to 10% for the first coat.

Dilution of the final coat is not recommended, as adding water may reduce the performance properties of the coating.

Is Bayris PRIMER 2 in 1 a metal primer for exterior use?

Yes. It is suitable as:

  • a metal primer for exterior applications

  • a primer for steel structures

  • a primer for gates and fences

  • a primer for pipes and tanks

It can be used both outdoors under atmospheric conditions and indoors.

How long does the alkyd anti-corrosion primer take to dry?

At a temperature of +22°C:

  • dust dry — 2 hours

  • fully dry — 24 hours

This is a fast-drying metal primer that helps reduce project completion times.

What is the coverage rate of the metal primer?

Average coverage: 80–120 g/m² per coat.

0.9 kg covers up to 12 m².
2.7 kg covers up to 35 m².

Actual consumption depends on the surface roughness of the metal and the method of application.

Should old paint be removed before application?

Yes. Any loose or flaking old coating must be completely removed.

The new primer should be applied to:

  • clean metal

  • or a sound rust layer after mechanical cleaning (up to 100 μm thick)

Can the 2-in-1 alkyd primer be diluted?

Yes. Dilution with a suitable thinner is permitted up to 10% to achieve the required application viscosity.

Exceeding this level may reduce the protective performance of the coating.

Why is it important to use the recommended thinner?

The thinner in an alkyd primer does more than simply reduce viscosity. It affects binder dissolution, evaporation rate, film formation and the final adhesion of the coating.

The thinner recommended by the manufacturer has been selected specifically for the product's chemical formulation. Using a poor-quality or unsuitable thinner may result in:

  • disruption of the coating structure,

  • changes in drying time,

  • reduced adhesion,

  • deterioration of anti-corrosion properties.

Even a minor variation in thinner composition can significantly affect the durability of the protective coating system.

Which rust primer offers the best long-term protection?

For maximum protection, a professional 2-in-1 anti-corrosion primer with corrosion inhibitors is recommended, as it:

  • stops the progression of rust

  • improves enamel adhesion

  • extends the service life of metal

  • reduces the risk of recurring corrosion

These are the types of solutions preferred by industrial users and professional contractors.

Why is PRIMER 2in1 more expensive than other primers?

Because it is a professional-grade product with a high content of active ingredients, developed and tested in Germany. It provides longer-lasting protection for metal surfaces and helps reduce the cost of future maintenance and repainting.