New_item_ua

Is the Plaster Resistant to Mould and Algae?

Yes. The coating is resistant to:

  • moss

  • algae

  • fungi

  • mould

When Does the Façade Reach Full Strength?

The coating reaches its full performance properties after 28 days.

At What Temperature Can It Be Applied?

+5 °C to +30 °C
Humidity up to 80%
No direct sunlight or precipitation.

Does the Surface Need to Be Primed?

Yes. The use of a silicone-based bonding primer is recommended for:

  • equalising substrate absorbency

  • improving adhesion

  • ensuring colour uniformity

Can It Be Applied by Machine?

Yes. Both manual and machine application are possible, with pressure settings and nozzle diameter adjusted to suit the equipment used.

What Does the “Pebble” Texture Mean?

It is a uniform granular texture (pebble-dash plaster) created by circular movements with a plastic float.

What Is the Consumption of Silicone Façade Plaster per m²?

  • 0.5 mm grain size — 1.8 kg/m²

  • 1.0 mm grain size — 2.0 kg/m²

  • 1.5 mm grain size — 2.2 kg/m²

Material consumption depends on the quality of surface preparation.

What Is the Difference Between 0.5, 1.0 and 1.5 mm Grain Sizes?

Smaller grain size:

  • lower material consumption

  • smoother texture

Larger grain size:

  • more pronounced texture

  • better at concealing surface imperfections

Is the Plaster Suitable for Mineral Wool Systems?

Yes. Thanks to its high vapour permeability (Sd ˃ 150 g/m² per day) and low water absorption (Class W3 ≤ 0.1 kg/m²·h0.5), it is an excellent choice for façade systems insulated with mineral wool.

What Is Ready-to-Use Silicone Façade Plaster?

It is a polymer decorative plaster supplied in a 25 kg bucket, ready for use. No cement or other components need to be added before application.

Where to Buy Hammered Metal Paint Wholesale?

“HAMMER 3D EFFEKT” anti-corrosion hammered metal paint (3-in-1) by TM “Bayris” can be purchased wholesale with VAT through authorised Bayris representatives or by submitting an enquiry via the Contacts page.

We actively cooperate with distributors, importers, wholesalers, retail chains and professional partners in international markets. BAYRIS offers export support, flexible partnership terms, technical assistance and marketing cooperation. To discuss distribution opportunities, export supplies, exclusive representation or private label projects, please contact our Export Department on 077-500-11-22.

In the BAYRIS product range, you will find solutions for virtually all types of repair and construction work, meeting the highest standards of quality and reliability.

Where to Buy 3-in-1 Hammered Paint for Rust in Ukraine?

3-in-1 hammered paint for rust (anti-corrosion) “HAMMER 3D EFFEKT” by TM “Bayris” can be purchased from retail DIY and hardware stores, major national building supply chains, Bayris partner showrooms such as BudBox, or ordered online with delivery across Ukraine via the official BudBox online store and selected marketplaces.

Common Mistakes When Applying Hammered Paint?

HAMMER 3D EFFEKT hammered enamel by TM “Bayris” features a unique 3D-effect formation technology. Failure to follow the application guidelines may compromise the decorative finish.

1. Using the Wrong Thinner

The most common mistake is using white spirit or solvent naphtha.

Consequences:

  • damage to the 3D structure

  • loss of texture depth

  • surface waviness

  • reduced corrosion protection

Only the thinner recommended by the manufacturer should be used.

2. Insufficient Stirring

The metallic pigment settles at the bottom of the can.

If the paint is not stirred for 2–3 minutes:

  • the 3D effect will be weaker

  • the texture may become uneven

  • staining may occur

3. Applying Excessively Thick Coats

Hammered paint should be applied in thin coats.

Excessive film thickness may lead to:

  • runs and sags

  • loss of texture definition

  • uneven texture formation

4. Incorrect Recoat Timing

The second coat should be applied:

  • either within the first 2 hours

  • or after full curing

Otherwise, surface waviness may occur.

5. Painting at Incorrect Temperatures

Temperatures below +10°C or high humidity:

  • slow down curing

  • impair the formation of the 3D effect

  • may cause surface defects

6. Brush Application on Large Surfaces

Due to the relatively fast drying time, achieving a uniform finish can be difficult.

For the best decorative result, spray application is recommended.

How Long Does the Coating Last?

When properly applied to a correctly prepared surface and in full accordance with the application guidelines, the coating can provide up to 8 years of service life in outdoor conditions.

The coating is characterised by:

  • high water resistance,

  • UV resistance,

  • stable gloss retention,

  • long-lasting corrosion protection.

Which Thinner Can Be Used?

Only the manufacturer’s recommended thinner should be used — Lösungsmittel PRO by “Bayris”.

The following must not be used:

  • white spirit

  • solvent naphtha

  • other universal thinners

An unsuitable thinner may:

  • damage the hammered-effect structure,

  • alter the drying rate,

  • cause waviness or film defects,

  • reduce corrosion protection properties.

Following the recommended thinning ratios (up to 10% for brush application and up to 20% for spray application) ensures proper formation of the 3D hammered effect and long-term coating durability.

Which Application Method Produces the Best 3D Effect?

The most pronounced decorative effect is achieved by spray application.

Recommendations:

  • apply 3–4 thin coats using a “wet-on-wet” technique;

  • observe the recommended intervals between coats;

  • temperature: +10°C to +25°C;

  • humidity up to 85%.

For smaller surfaces, brush application in 2–3 thin coats is also acceptable.

What Makes This Hammered Enamel Better?

This is not a budget hammered paint. Its key advantages include:

  • enhanced and consistent 3D decorative effect;

  • high-quality alkyd resins;

  • durable metallic pigments;

  • a rich, uniform gloss finish;

  • a service life of up to 8 years;

  • minimal visibility of touch-up repairs on the coated surface.

Cheaper alternatives often use simplified formulations, produce a less pronounced texture, lose gloss more quickly and provide lower corrosion resistance.

Can Hammered Paint Be Applied Directly to Rust?

Yes, the paint can be applied directly to firmly adhered rust up to 100 microns thick, after removing any loose rust and contaminants by mechanical cleaning.

The 3-in-1 formula provides:

  • corrosion protection,

  • excellent adhesion to untreated metal,

  • a hydrophobic barrier against atmospheric moisture.

For maximum coating durability, the recommended application procedure and drying conditions should be followed.

What Is 3-in-1 Hammered Paint with a 3D Effect?

3-in-1 hammered paint is an anti-corrosion alkyd enamel that combines the functions of a primer, rust converter and decorative topcoat in a single product.

HAMMER 3D EFFEKT creates an enhanced three-dimensional “hand-hammered” effect that:

  • conceals minor imperfections in the metal surface,

  • creates a deep textured finish,

  • provides a premium decorative appearance.

The product was developed and tested in Germany using high-quality raw materials and stable metallic pigments.

How to Buy SUPER WEIß Bayris Alkyd Enamel Wholesale with VAT?

SUPER WEIß alkyd enamel by TM “Bayris” (“Super White” TM “Bayris”) can be purchased wholesale with VAT through official Bayris representatives or by submitting an enquiry via the Contacts page. You can also receive consultation from a wholesale account manager by calling: 067-139-30-30.

In the BAYRIS product range, you will find solutions for virtually all types of repair and construction work, meeting the highest standards of quality and reliability.