Available packaging and coverage
0.9 kg – up to 10 m² 100–180 g/m² per coat
2.7 kg – up to 30 m² 100–180 g/m² per coat
Description and properties
“UNIVERSAL” Enamel by TM “Bayris” is a gloss alkyd enamel designed for painting primed metal, timber and concrete surfaces exposed to outdoor weather conditions and indoor environments, including metal structures, equipment, lifting cranes, pipes, tanks, gates, doors, window frames, furniture, walls and similar substrates.
It is also suitable for painting floors, stairs and thresholds (red-brown and yellow-brown colours only).
Bayris Alkyd Enamel is a high-strength coating with a service life of up to 7 years when applied in two coats over a properly primed surface. The product was developed and tested in Germany.
“UNIVERSAL” Enamel by TM “Bayris” is a professional, technologically advanced product that is easy to apply and offers excellent hiding power. Its range of bright and vivid colours satisfies even the most demanding users. The enamel forms a smooth, even, highly durable and high-gloss finish. It is resistant to water and detergents and protects surfaces from the effects of sunlight and rain.
Product and surface preparation
If required, the enamel may be diluted with “Lösungsmittel Bayris” solvent to a suitable working viscosity, but by no more than 10% by weight. Stir thoroughly before use.
Before painting, remove old paint coatings, rust, dirt, dust and grease. New metal surfaces must be degreased and primed. The substrate must be dry before application.
Application
Apply the enamel using a roller, brush or spray equipment. Drying time for each coat at +20°C and 55% relative humidity:
• Dust dry: 12 hours
• Fully dry: 24 hours
Drying time increases at lower temperatures and with higher product viscosity. Coverage per coat is 100–180 g/m².
Safety precautions
Flammable liquid and vapour. Keep away from heat, sparks, open flames and hot surfaces. No smoking.
Read the instructions and product labelling before use. Keep out of reach of children. Use only outdoors or in well-ventilated areas. May cause drowsiness or dizziness. Avoid contact with eyes, skin and clothing.
VOC content
The VOC limit value for this product is 500 g/L. The ready-to-use product contains no more than 330 g/L VOC.
