DEOS 5 Matt Interior Latex Paint by Bayris

“DEOS 5” interior latex paint for walls and ceilings by TM “Bayris” is designed for decorative and protective painting of walls and ceilings in dry and humid indoor areas exposed to intensive everyday use. It is suitable for residential, office and public buildings with high operational demands. The paint can be applied to new or previously painted water-dispersion coatings on cement-lime, cement, lime and gypsum plasters, plasterboard, concrete, brick, wood and wood-based materials, as well as paintable wallpapers.

“DEOS 5” TM “Bayris” is easy to apply and provides excellent hiding power (Class 1 at a coverage rate of 5.5 m²/l). The resulting finish is white and matt, effectively concealing minor surface imperfections. The coating is vapour permeable and does not restrict water vapour transmission. It is resistant to wet cleaning (Class 2 wash resistance). Environmental benefits are confirmed in accordance with the international ISO 14024 standard. The paint is free from strong odours and toxic substances.

The substrate must be carefully prepared before painting. It should be sound, evenly absorbent, degreased, visually clean, dry and free from dust, mould and other biological contamination. Fresh cement-lime plasters should be painted after 3–4 weeks from application, while gypsum plasters should be painted after 2 weeks. Poorly adhering glue-based or lime-based coatings should be removed. Existing emulsion paint coatings with good adhesion should be washed with water and detergent, rinsed with clean water and allowed to dry. Cracks and uneven areas should be repaired with filler. Areas affected by mould should be treated with “Bio Stop” by TM Bayris according to the instructions. Highly absorbent or weak surfaces should be primed with “Profi Grunt” by TM Bayris according to the instructions. Non-woven and fibreglass wallpapers should be painted according to the wallpaper manufacturer’s recommendations.

Before application, “DEOS 5” paint should be thoroughly stirred until a uniform consistency is achieved. Prepare a sufficient quantity of paint to complete one continuous surface area. When tinting paint from different production batches or pack sizes, all containers should be mixed together before use. Do not add lime or mix with other types of emulsion paint.

The paint may be applied by brush, roller or spray in 1–2 coats with an interval of 2–4 hours between coats. Some bright and saturated colours may require an additional coat. Application should be carried out at substrate and ambient temperatures between +10 °C and +30 °C. To ensure colour consistency on large surfaces, painting should be performed continuously using the “wet-on-wet” method. Any interruptions should be made in the least visible areas, such as corners and junctions. Wash tools with water immediately after use. During and after application, the room should be ventilated until any residual odour has disappeared.

Important! Under normal conditions, the coating develops its full performance properties after 28 days. Intensive use of the painted surface should therefore be avoided during this period. The painted surface may be cleaned with water or a warm soapy solution using a soft sponge or cloth. Avoid using hard-bristled brushes, as excessive scrubbing may create glossy marks on the matt finish.

The paint is supplied in white and is ready for use. “DEOS 5” latex paint by TM “Bayris” can be tinted using Bayris System tinting equipment or manually with colourants.

Tinted paint cannot be returned or exchanged.