Bayris “Luxlatex” Interior Paint

“Luxlatex” interior latex paint for walls and ceilings by TM “Bayris” is designed for decorative and protective painting of walls and ceilings in dry and humid rooms exposed to intensive use. Suitable for residential, commercial and public premises with high эксплуатационной нагрузкой. The paint can be applied to new or previously painted water-dispersion surfaces made of cement-lime, cement and lime plasters, gypsum plasters, plasterboards, concrete, brick, wood and wood-based materials, as well as paintable wallpapers.

“Luxlatex” TM “Bayris” is easy to apply and offers excellent hiding power (Class 1 at a coverage rate of 5.5 m²/l). The finished coating is white, matt and effectively hides minor surface imperfections. It is vapour permeable and does not block water vapour transmission. The coating is resistant to wet cleaning (Class 2 wash resistance). Environmental benefits are confirmed according to the international ISO 14024 standard. Free from strong odours and toxic substances.

The surface to be painted must be carefully prepared and should be strong, evenly absorbent, degreased, visually clean, dry and free from dust, mould and other biological contamination. Fresh cement-lime plasters should be painted after 3–4 weeks from application, gypsum plasters after 2 weeks. Old glue-based or lime-based coatings with poor adhesion should be removed. Previously painted emulsion surfaces with good adhesion should be washed with water and detergent, rinsed with clean water and dried. Uneven areas and cracks should be levelled with filler. Areas affected by mould should be treated with “Bio Stop” by TM Bayris according to the instructions. Highly absorbent and weak surfaces should be primed with “Profi Grunt” by TM Bayris according to the instructions. Non-woven and fibreglass wallpapers should be painted according to the wallpaper manufacturer’s recommendations.

Before application, “Luxlatex” TM “Bayris” paint should be thoroughly stirred until uniform consistency is achieved. Sufficient paint should be prepared for painting one continuous surface area. When tinting paints from different production batches or different pack sizes, the products should be mixed together. Do not add lime or mix with other types of emulsion paint. The paint may be applied by brush, roller or spray in 1–2 coats with intervals of 2–4 hours. Some bright saturated colours may require an additional coat. Application should be carried out at substrate and ambient temperatures between +10 °C and +30 °C. To ensure colour consistency on large surfaces, painting should be performed continuously using the “wet-on-wet” method. Breaks in painting should be made in the least visible places, such as corners or joints between surfaces. Wash tools with water immediately after use. During and after painting, ventilate the room until the odour has completely disappeared.

Important! Under normal conditions, the paint coating achieves its full performance properties after 28 days from application. Intensive use of the painted surface should therefore be avoided during this period. The painted surface may be cleaned with water or warm soapy solution using a soft sponge or cloth. Avoid using hard-bristled brushes, as excessive friction during cleaning may cause glossy marks on the painted surface.

The white paint is ready for use. “Luxlatex” latex paint by TM “Bayris” can be tinted using Bayris System tinting equipment or manually with colourants.

Tinted paint cannot be returned or exchanged!