Description and properties
Fast-Drying Decorative Wood Treatment "AQUALAZUR" by TM Bayris ("Aqualazur" by TM Bayris) is designed for the decorative and protective treatment of prepared timber surfaces, including window frames, doors, garden furniture, fences, timber houses and gazebos. It may also be used for finishing timber cladding, furniture and other wooden elements indoors. "Aqualazur" is particularly suitable for softwood species such as spruce, pine and birch. Its use on hardwood species such as oak, ash and acacia is not recommended. Suitable for both interior and exterior applications.
Aqualazur forms an elastic protective coating on the treated surface, protecting timber from water penetration just one hour after application. It enhances the colour of the timber while preserving its natural grain and texture. Resistant to weathering, including UV radiation, snow and rain. Easy to apply, with no strong irritating odour, and dries quickly, making application significantly easier. Safe for people, plants and animals. If the timber has not been previously protected against biodeterioration, we recommend treating it first with "AQUAGRUNT" Bioprotective Wood Impregnant by TM Bayris.
Application
"Aqualazur" by Bayris should be applied at temperatures between +10°C and +30°C. If the timber has not previously been protected against biodeterioration, we recommend using "AQUAGRUNT" or "BASE-GRUNT" wood primer treatment. The timber must be clean and dry. Stir thoroughly before use.
Apply a thin coat with a brush along the grain of the timber. It is recommended to apply 2–3 coats, allowing approximately 1 hour between coats.
Aqualazur is designed for the protection and decoration of timber surfaces both indoors and outdoors. Provides water protection just 1 hour after application.
Packaging 0.75 L; 2.5 L; 10 L
Coverage from 1 L up to 15 m²/L per coat
Range 8 colours
Drying time 1 hour for each coat
Number of coats 2–3 coats recommended
Base water-based