Available Packaging and Coverage
1L 0.6 L per 50 kg of cement at temperatures from +5 °C to -5 °C
5L 1.2 L per 50 kg of cement at temperatures from -5 °C to -10 °C
10L 1.4 L per 50 kg of cement at temperatures from -10 °C to -15 °C
Application
Bayris Anti-Frost Plasticiser is designed to regulate the properties of all ready-to-use types of concrete (reinforced and non-reinforced), mortar mixes and dry construction mixtures. It is used for screeds, monolithic construction, masonry and other types of construction work at low and sub-zero temperatures from +5 °C to -15 °C.
Characteristics
A universal chloride-free additive by Bayris that reduces the mixing water content by up to 10% without changing the consistency. Accelerates setting and hardening while maintaining the workability of the concrete mix. Increases the density and waterproofing performance of finished products. Reduces the crystallisation temperature of water and accelerates the cement hydration process. Enables the achievement of the minimum required early strength of 5 MPa and improves the final strength of finished concrete products. Provides high frost resistance and prevents efflorescence during service life. When used during warmer periods, it can also significantly accelerate the concrete curing process.
Application Instructions
Apply at ambient temperatures between +25 °C and -15 °C and relative humidity above 50%. Slight sediment formation in the additive is acceptable. Add to the concrete mix simultaneously with the mixing water. Ensure even distribution of the additive by thorough mixing. When using the anti-frost additive at temperatures below 0 °C, freshly placed concrete must be protected from freezing, especially during the initial curing stage.
Warning!
Do not add to dry components.
Consumption
0.6 L per 50 kg of cement at temperatures from +5 °C to -5 °C; 1.2 L per 50 kg of cement at temperatures from -5 °C to -10 °C; 1.4 L per 50 kg of cement at temperatures from -10 °C to -15 °C.
Anti-frost additive designed for screeds, monolithic construction, masonry and other types of construction work at low and sub-zero temperatures from -15 °C to +25 °C.
Packaging 1L; 5L; 10L
Dosage 600 ml per 50 kg of cement
TEMPERATURE RANGE: use at air temperatures from -15 °C to +25 °C
Featurescontains a metal corrosion inhibitor
Acceleratesearly concrete strength development by up to 50%
